Did you know that mold starts growing within 24-48 hours in a soaked carpet? And air drying doesn’t do anything to mitigate the growth. A wet carpet requires special attention to prevent water stains, mold, and mildew.
Here’s our step-by-step guide for water extraction, drying, cleaning, costs, and more.
Get Water Out of Carpet
Has a big leak soaked your carpet? Extract the water as quickly as possible if you are looking to prevent water damage.
Here are the steps by which you extract the water out of the carpet.
Shop-Vac or Wet/Dry Vacuums: These are not your regular vacuums but the ones used in construction. They have stronger suction, better motor, and a special filter(sponge).
Towel Dry: Place towels on the carpet; Walk or jump on them to squeeze out that extra water. Repeat the process a few times.
Check the Carpet Padding: Remove the carpet and check the padding underneath. Use a shop vac or towel dry as needed.
However, for sewage contamination, you may want to phone the emergency services for a free quote.
Cost for Water Extraction
Water extraction costs roughly $2,000. The costs include:
- Amount of water to extract
- Contaminated water disposal
Dry a Wet Carpet at Home
With a wet carpet, you are at risk for mold and mildew.
Follow the below steps to dry your carpet properly :
- Open all the curtains to let sunlight inside the house.
- Run the fans until the carpet begins to dry out.
- Use box fans near doors and windows to blow air into the room.
- A box heater also helps to dry since warm air can hold more moisture.
Note that it should take 3-4 days to completely dry if you can still feel the moisture, phone the technicians.
Prevent Mold Growth After Water Damage
The first thing you need to do after flood damage is to dry the carpet completely. In case you suspect any musty odor, stop all the fans since they can help spread the spores. Finally, remove all the furniture and personal belongings from the room.
Moreover, use a dehumidifier to get the moisture content of the room to 50%. You may also need to maintain this level of dryness to the mold growth.
Tips to Dry Out a Wet Carpet
Here are a few tips to prevent the spread of moisture.
- Start with removing the source of water damage.
- Assess your furniture and upholstery; Remove them from your home for the time being.
- Create an airflow with high-powered fans. Add a box heater and dehumidifier to help quicken the process.
- Replace the carpet pad to prevent mold growth.
- Check the flooring for water damage.
- Steam clean to kill the toxins.
- Spread a liberal amount of baking soda to remove the remaining moisture.
Remove Water Stains from Carpet
For a wet carpet, do the following to prevent water damage.
- Start with using a towel or a white cloth to remove all the excess water.
- Place several paper towels over the entire area and weigh them down.
- Finally, use a steam iron 6″ away from the carpet to remove the water stain.
Remove Old Water Stains
For old water stains, the below steps can help you:
- Prepare a solution with equal parts of white vinegar and water.
- Dampen a cloth in the vinegar solution and press it onto the water stain, starting with the edges. Do not rub.
- Rubbing the cloth back and forth aggravates the stain.
- Repeat the process over the entire area and dry it thoroughly.
With a bit of elbow grease, you should be able to eradicate the water stain.
How to Avoid Carpet Mold After Water Damage
A wet carpet after a flood or a leak is the least of your problem. It leads to a host of other issues such as mold, particularly under the carpets.
Here are a few tips to prevent the growth of mold:
- Start cleaning as soon as possible. Timing is the key.
- Utilize all the tools at your disposal to dry the carpet.
- Mold, when airborne, can cause health problems for some people by irritating your eyes, nose, lungs, etc.
- Steam cleaning sanitizes and deodorizes your home.
- Remove the furniture from the affected areas until it is safe.
Wet Carpets: Replace or Restore
The rule of thumb is, if your carpet has been wet for more than 72 hours, it is better to replace than restore. It takes mold no longer than 72 hours to form. Moreover, you cannot kill it.
While a professional can salvage your carpet, it may not be worth it.
Best Carpet Cleaning Method
One of the best ways to clean the carpet is steam cleaning which removes 90% of the bacteria and dirt from the carpets.
Alternatively, you can also dry clean if you want your carpet ready for foot traffic as soon as possible.
Cost to Dry Clean a Carpet
The cost to dry clean a 2,200 sq. ft. home covered in a carpet ranges from $323 to $600. However, it may change depending on the stains and targeted spot cleaning.
Whether it’s a leak or a flood, you need to take immediate action once your carpet is involved. The first and the most critical response is to extract the water, followed by drying and checking for molds. Despite your best efforts, you may require the help of a professional.
Professionals clean the carpet and restore it to its original glory, provided that you start the process as soon as possible.
If you are in need of having water extracted from your carpeting due to leaks or flooding, or simply are interested in having your carpet thoroughly cleaned, contact CleanBright carpet cleaning specialists. CleanBright has over 10 years experience in carpet cleaning and restoration, and all their services are backed by a complete satisfaction guarantee, so they’ll give your money back if you’re unhappy.